Feature: 

This kind of wooden floor is the most luxurios and customizable. We can have what ever width and langht and all the color. Also the surface texture can be finished on request.
As sample in picture we are proposing gray planed and brushed, water painted, board widths 20 and langht 180cm.

Geographical provenience: 

SLOVIENIA EU

General Instructions:   

• Use in ambient whit temperature around 15/16 °C and humidity between 45 and 60%. (using humidifier in case of radiator heating system or air conditioning);
• Wood is a living material that fit with environmental temperature and the air damp. Is strongly suggested to not have, if possible, temperature and humidity jumping;                                                                     
• In case of under floor heating system be careful to keep the floor temperature not superior to 25°C. We suggest starting gradually the heating system implant being avoid causing any termical shock. The humidity in the ambient has to be controlled with humidifier and air conditioning. Don't use floor system temperatures over 29C°;
• Be careful, after having lie down the floor, for the first month, to don't cover the new floor whit carpet or similar. Be careful to keep ventilate the new rooms;                                                
• Be careful, for the first 4 weeks, to don't do painting works or other works those can cause a humidity increase;                                   
• In case of room, not used for long periods, be careful to ventilate the locals when the external temperature is between 15 and 25C°;   
• Is always suggest the use of protection under the chairs support and table-bed support;                                                               

Cleaning instructions:

• Using vacuum being aware to don't use brushes those could scrape the floor surface or use electrostatic dust rags.                           
• Wash with neutral soaps. Use water being careful to don't live the floor too wet. This for avoid internal humidity increase.               
• Don't use Alcohol or any other solvent or corrosive substance those could cause chromatic alteration.                                    
• Use cleaning rags with cotton microfiber if the wood surface is rough. Use short microfiber rags if the wood surface is polished. 

Under floor heating 

Our engineered wood is strongly recommended for beeing installed over under floor heating floor following this instructions:

• Acclimatisation before fitting; Engineered wood flooring will require 7 to 10 days to acclimatise to the same conditions that they will experience in use.
• Before fitting; the under floor heating system should be fully commissioned and fully operational with all components in place before any fitting commence; The under floor heating system should be switched off at least 48 hours before any fitting commences
• During Fitting the under floor heating should remain off whilst the wood flooring is being fitting
• Once all fitting has been completed the floor should be left for 24 hours before it is walked on; The heating should not be switched on until 72 hours after fitting has been completed. After can be switch off.
• The under floor heating should then be switch on at it’s lowest heat probably approximately 18⁰C at finished floor level and the heat should then be gradually increased by gradually in 4 days and THE HEAT SHOULD NEVER EXCEED 30° FINISHED FLOOR LEVEL